I went through a few designs, for my first version used Fun Fur for the brim and beard. I think think looks great, BUT annoyed Baby Boy to no end, all that fur in his mouth and tickling his nose, I hadn’t even though of that!
Then I switched the fun fur beard to a bobble beanie, but didn’t love the way the fun fur hat and the bobble beard worked together…
SO I decided to bring back a stitch I tried before, but didn’t love, the loop. In fact I went with the DOUBLE loop. I love love LOVE the way it looks, and how it turned out, BUT I will say the loops are easy to pull out of place, which is why I don’t usually use this stitch, but for a season look? perfect!
My sweet niece is rocking the reindeer, making them the perfect pair this holiday season!
Materials:
lion brand medium weight yarn (I used cotton ease) in red
Lion Brand bulky yarn (I used Baby’s first) in white
Hook I- 5.50mm
Hook N- 9.00mm
Stitch abbreviation:
slip stitch (sl st)
single crochet (sc)
half double crochet (hdc)
double loop stitch (insert your hook into the stitch. take yarn and wrap it clockwise around your left index finger twice (opposite of the way you’d normally hold it over your finger.). stick the hook under the loops on your finger catching all three strands with the hook. pull all three strands through the stitch, YO and pull through all 4 loops on hook.)
left handed double loop stitch (if you have a hard time with a left handed double loop substitute with a sc row instead)
The loops shows up on the opposite side of what your working on, so working in the round you need to make sure your working from the INSIDE of the hat so that the loops show up on the OUTSIDE.
Baby sized Santa hat
with hook-I
magic ring
row 1- ch2, 8 hdc, sl st in top of first hdc (8)
row 2-4- ch2, hdc 8 times, sl st in top of first hdc (8)
row 5- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (10)
row 6- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (12)
row 7- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (14)
row 8- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (16)
row 9- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (20)
row 10- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (24)
row 11- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (28)
row 12- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (32)
Row 13- Ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (40)
Row 14- Ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (48)
Row 15- Ch2, hdc in each st, sl st in top of first hdc. (48)
Row 16-20- repeat row 10
row 21- ch2, skip 1 sl st around (24 spaces)
row 22- switch to chunky white yarn and larger hook-N, and from the inside out sc in each 2ch spaces around (24)
Row 23-25- double loop stitch around after 3 rows sl st, finish off
make and add a poof ball (I didn’t cut the ends to keep it loopy and matching the brim and beard)
Toddler sized Santa hat
with hook-I
magic ring
row 1- ch2, 8 hdc, sl st in top of first hdc (8)
row 2-4- ch2, hdc 8 times, sl st in top of first hdc (8)
row 5- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (10)
row 6- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (12)
row 7- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (14)
row 8- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (16)
row 9- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (20)
row 10- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (24)
row 11- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (28)
row 12- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (32)
Row 13- Ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (40)
Row 14- Ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (48)
Row 15- Ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (56)
Row 16- Ch2, hdc in each st, sl st in top of first hdc. (56)
Row 17-22- repeat row 10
row 23- ch2, skip 1 sl st around (28 spaces)
row 24- switch to chunky white yarn and larger hook-N, and from the inside out sc in each 2ch spaces around (28)
Row 25-27- double loop stitch around after 3 rows sl st, finish off
make and add a poof ball (I didn’t cut the ends to keep it loopy and matching the brim and beard)
Child size Santa hat
with hook-I
magic ring
row 1- ch2, 8 hdc, sl st in top of first hdc (8)
row 2-4- ch2, hdc 8 times, sl st in top of first hdc (8)
row 5- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (10)
row 6- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (12)
row 7- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (14)
row 8- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (16)
row 9- ch2, *hdc in next 7 st, 2hdc in next st* around, sl st in top of first hdc (18)
row 10- ch2, *hdc in next 8 st, 2hdc in next st* around, sl st in top of first hdc (20)
row 11- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (24)
row 12- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (28)
row 13- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (32)
row 14- ch2, *hdc in next 7 st, 2hdc in next st* around, sl st in top of first hdc (36)
row 15- ch2, *hdc in next 8 st, 2hdc in next st* around, sl st in top of first hdc (40)
Row 16- Ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (48)
Row 17- Ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (56)
row 18- ch2, *hdc in next 13 st, 2hdc in next st* around, sl st in top of first hdc (60)
Row 19- Ch2, hdc in each st, sl st in top of first hdc. (60)
Row 20-26- repeat row 10
row 27- ch2, skip 1 sl st around (30 spaces)
row 28- switch to chunky white yarn and larger hook-N, and from the inside out sc in each 2ch spaces around (30)
Row 29-31- double loop stitch around after 3 rows sl st, finish off
make and add a poof ball (I didn’t cut the ends to keep it loopy and matching the brim and beard)
Working in a round it’s easy to get the loops on the front of your piece, by working from the back. But when working in rows it’s harder. Usually you simply do a sc row between every loop row, but with this thick yarn there are only a few rows, if every other one was an SC there would be less loops. SO I decided to create a loop row every row, meaning I did a right handed loop row, then a left handed loop row. IF you have a hard time with the left handed loop rows simply do an SC row instead.
extra small loop beard
hook K
ch 22
row 1- sc in second ch from hook and in each ch across (21)
row 2- ch 1 sc 7 times hdc 7 times sc 7 times (21)
row 3- switch to left handed ch 1 sc double loop 21 times sc (21)
row 4- (back to right hand) ch 1 sc double loop 21 times sc (21)
row 5- repeat row 3 (21)
row 6- (back to right hand) ch 1 sc double loop 4 times, skip a stitch, double loop twice, skip a stitch, double loop 3 times, skip a stitch, double loop twice, skip a stitch, double loop 4 times sc (17)
row 7- switch to left handed ch 1 sc double loop 4 times, ch 6, skip 7 stitches, double loop 4 times sc
row 8- back to right hand, sl st 4 times, short double loop, short double loop in each ch, short double loop in stitch, sl st 4 times
finish off
small loop beard
hook K
ch 24
row 1- sc in second ch from hook and in each ch across (23)
row 2- ch 1 sc 8 times hdc 7 times sc 8 times (23)
row 3- ch 1 sc double loop 21 times sc (23)
row 4- switch to left handed ch 1 sc double loop 21 times sc (23)
row 5- (back to right hand) repeat row 3 (23)
row 6- repeat row 4 (23)
row 7- (back to right hand) ch 1 sc double loop 5 times, skip a stitch, double loop twice, skip a stitch, double loop 3 times, skip a stitch, double loop twice, skip a stitch, double loop 5 times sc (19)
row 8- switch to left handed ch 1 sc double loop 5 times, ch 6, skip 7 stitches, double loop 5 times sc
row 9- back to right hand, sl st 5 times, short double loop, short double loop in each ch, short double loop in stitch, sl st 5 times
finish off
medium loop beard
hook K
ch 26
row 1- sc in second ch from hook and in each ch across (25)
row 2- ch 1 sc 8 times hdc 9 times sc 8 times (25)
row 3- switch to left handed ch 1 sc double loop 21 times sc (25)
row 4- (back to right hand) ch 1 sc double loop 21 times sc (25)
row 5- repeat row 3 (25)
row 6- (back to right hand) repeat row 4 (25)
row 7- repeat row 3 (25)
row 8- (back to right hand) ch 1 sc double loop 5 times, skip a stitch, double loop 3 times, skip a stitch, double loop 3 times, skip a stitch, double loop three times, skip a stitch, double loop 5 times sc (21)
row 9- switch to left handed ch 1 sc double loop 5 times, ch 8, skip 9 stitches, double loop 5 times sc
row 10- back to right hand, sl st 5 times, short double loop, short double loop in each ch, short double loop in stitch, sl st 5 times
finish off
sew the beard to the inside of the santa hat and your done.
Double Loop Santa Hat
Materials:
lion brand medium weight yarn in red (I used cotton ease)
Lion Brand chunky weight yarn in white (I used baby’s first)
Hook I- 5.50mm
Hook N- 9.00mm
Stitch abbreviation:
slip stitch (sl st)
single crochet (sc)
half double crochet (hdc)
double loop stitch (insert your hook into the stitch. take yarn and wrap it clockwise around your left index finger twice (opposite of the way you’d normally hold it over your finger.). stick the hook under the loops on your finger catching all three strands with the hook. pull all three strands through the stitch, YO and pull through all 4 loops on hook.)
left handed double loop stitch (if you have a hard time with a left handed double loop substitute with a sc row instead)
Baby sized Santa hat
with hook-I
magic ring
row 1- ch2, 8 hdc, sl st in top of first hdc (8)
row 2-4- ch2, hdc 8 times, sl st in top of first hdc (8)
row 5- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (10)
row 6- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (12)
row 7- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (14)
row 8- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (16)
row 9- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (20)
row 10- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (24)
row 11- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (28)
row 12- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (32)
Row 13- Ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (40)
Row 14- Ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (48)
Row 15- Ch2, hdc in each st, sl st in top of first hdc. (48)
Row 16-20- repeat row 10
row 21- ch2, skip 1 sl st around (24 spaces)
row 22- switch to chunky white yarn and larger hook-N, and from the inside out sc in each 2ch spaces around (24)
Row 23-25- double loop stitch around after 3 rows sl st, finish off
make and add a poof ball (I didn’t cut the ends to keep it loopy and matching the brim and beard)
Toddler sized Santa hat
with hook-I
magic ring
row 1- ch2, 8 hdc, sl st in top of first hdc (8)
row 2-4- ch2, hdc 8 times, sl st in top of first hdc (8)
row 5- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (10)
row 6- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (12)
row 7- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (14)
row 8- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (16)
row 9- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (20)
row 10- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (24)
row 11- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (28)
row 12- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (32)
Row 13- Ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (40)
Row 14- Ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (48)
Row 15- Ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (56)
Row 16- Ch2, hdc in each st, sl st in top of first hdc. (56)
Row 17-22- repeat row 10
row 23- ch2, skip 1 sl st around (28 spaces)
row 24- switch to chunky white yarn and larger hook-N, and from the inside out sc in each 2ch spaces around (28)
Row 25-27- double loop stitch around after 3 rows sl st, finish off
make and add a poof ball (I didn’t cut the ends to keep it loopy and matching the brim and beard)
Child size Santa hat
with hook-I
magic ring
row 1- ch2, 8 hdc, sl st in top of first hdc (8)
row 2-4- ch2, hdc 8 times, sl st in top of first hdc (8)
row 5- ch2, *hdc in next 3 st, 2hdc in next st* around, sl st in top of first hdc (10)
row 6- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (12)
row 7- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (14)
row 8- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (16)
row 9- ch2, *hdc in next 7 st, 2hdc in next st* around, sl st in top of first hdc (18)
row 10- ch2, *hdc in next 8 st, 2hdc in next st* around, sl st in top of first hdc (20)
row 11- ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (24)
row 12- ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (28)
row 13- ch2, *hdc in next 6 st, 2hdc in next st* around, sl st in top of first hdc (32)
row 14- ch2, *hdc in next 7 st, 2hdc in next st* around, sl st in top of first hdc (36)
row 15- ch2, *hdc in next 8 st, 2hdc in next st* around, sl st in top of first hdc (40)
Row 16- Ch2, *hdc in next 4 st, 2hdc in next st* around, sl st in top of first hdc (48)
Row 17- Ch2, *hdc in next 5 st, 2hdc in next st* around, sl st in top of first hdc (56)
row 18- ch2, *hdc in next 13 st, 2hdc in next st* around, sl st in top of first hdc (60)
Row 19- Ch2, hdc in each st, sl st in top of first hdc. (60)
Row 20-26- repeat row 10
row 27- ch2, skip 1 sl st around (30 spaces)
row 28- switch to chunky white yarn and larger hook-N, and from the inside out sc in each 2ch spaces around (30)
Row 29-31- double loop stitch around after 3 rows sl st, finish off
make and add a poof ball (I didn’t cut the ends to keep it loopy and matching the brim and beard)
Beards
IF you have a hard time with the left handed loop rows simply do an SC row instead.
extra small loop beard
hook K
ch 22
row 1- sc in second ch from hook and in each ch across (21)
row 2- ch 1 sc 7 times hdc 7 times sc 7 times (21)
row 3- switch to left handed ch 1 sc double loop 21 times sc (21)
row 4- (back to right hand) ch 1 sc double loop 21 times sc (21)
row 5- repeat row 3 (21)
row 6- (back to right hand) ch 1 sc double loop 4 times, skip a stitch, double loop twice, skip a stitch, double loop 3 times, skip a stitch, double loop twice, skip a stitch, double loop 4 times sc (17)
row 7- switch to left handed ch 1 sc double loop 4 times, ch 6, skip 7 stitches, double loop 4 times sc
row 8- back to right hand, sl st 4 times, short double loop, short double loop in each ch, short double loop in stitch, sl st 4 times
finish off
small loop beard
hook K
ch 24
row 1- sc in second ch from hook and in each ch across (23)
row 2- ch 1 sc 8 times hdc 7 times sc 8 times (23)
row 3- ch 1 sc double loop 21 times sc (23)
row 4- switch to left handed ch 1 sc double loop 21 times sc (23)
row 5- (back to right hand) repeat row 3 (23)
row 6- repeat row 4 (23)
row 7- (back to right hand) ch 1 sc double loop 5 times, skip a stitch, double loop twice, skip a stitch, double loop 3 times, skip a stitch, double loop twice, skip a stitch, double loop 5 times sc (19)
row 8- switch to left handed ch 1 sc double loop 5 times, ch 6, skip 7 stitches, double loop 5 times sc
row 9- back to right hand, sl st 5 times, short double loop, short double loop in each ch, short double loop in stitch, sl st 5 times
finish off
medium loop beard
hook K
ch 26
row 1- sc in second ch from hook and in each ch across (25)
row 2- ch 1 sc 8 times hdc 9 times sc 8 times (25)
row 3- switch to left handed ch 1 sc double loop 21 times sc (25)
row 4- (back to right hand) ch 1 sc double loop 21 times sc (25)
row 5- repeat row 3 (25)
row 6- (back to right hand) repeat row 4 (25)
row 7- repeat row 3 (25)
row 8- (back to right hand) ch 1 sc double loop 5 times, skip a stitch, double loop 3 times, skip a stitch, double loop 3 times, skip a stitch, double loop three times, skip a stitch, double loop 5 times sc (21)
row 9- switch to left handed ch 1 sc double loop 5 times, ch 8, skip 9 stitches, double loop 5 times sc
row 10- back to right hand, sl st 5 times, short double loop, short double loop in each ch, short double loop in stitch, sl st 5 times
finish off
sew the beard to the inside of the santa hat and your done.
資料來源 : http://imtopsyturvy.com/double-loop-bearded-santas-hat/
沒有留言:
張貼留言